Skip to content
Labs
Sign inRequest a demo

RCC · Buildings and IoT

Building systems in the same picture as security

BMS points, equipment and alarms over BACnet, Modbus, OPC UA and KNX, shown beside cameras and doors, with faults turned into work orders.

Book a control-room walkthroughHow it works
Building points become alarms beside cameras and doors, and faults become work ordersFour stages run left to right: building protocols, normalised points and states, alarms shown on the site map beside cameras, and a work order raised in the ERP or service desk.BACnet · ModbusOPC UA · KNXpointsstates · trendsalarmsbeside cameraswork orderERP · service desk
  1. Building systems connect over their own protocols, read-only by default.
  2. Points and alarms appear on the same map as cameras and doors.
  3. A fault becomes a work order in the system your maintenance team uses.

Capabilities

What building management in RCC does

  • Points and equipment

    BMS points, equipment and alarms over BACnet, Modbus, OPC UA, KNX and Haystack.

  • Your BMS

    Connectors for Johnson Controls Metasys, Siemens Desigo CC, Schneider EcoStruxure and Tridium Niagara.

  • Elevators

    Elevator status and control through KONE and BACnet.

  • Alarms beside cameras

    Equipment alarms on the site map with the nearest camera.

  • Work orders

    Faults become work orders in your ERP or service desk.

  • Read-only by default

    Any write to equipment is an explicit, approved and recorded action.

How it works

From BMS point to work order

  1. Connect

    BMS over its protocol.

  2. Map

    Points to rooms, floors and cameras.

  3. Watch

    Alarms in the security picture.

  4. Fix

    Work orders to the right team.

Where it is used

Where buildings and security meet

  • Corporate buildings

    Security and facilities in one view.

  • Hospitals

    Critical equipment watched with security.

  • Data centres

    Cooling and power beside access and video.

On the RCC platform

Stronger next to the rest of RCC

An equipment alarm appears on the site map with its nearest camera, a fault becomes a work order in your ERP or service desk, and nothing is written to equipment without an approved, recorded action.

The RCC platformIntegrationsSecurity
Fire and life safetyPanel supervision, PA, emergency lighting and evacuation.IoT sensors and dronesSensor thresholds, camera links, drone missions and geofences.ERP and service deskWork orders to SAP, Maximo, ServiceNow and more.

Questions

What buyers ask

Will RCC change our building settings?

Not unless you allow it. Connections are read-only by default, and any write is approved and recorded.

Bring your BMS into RCC

Tell us which building management system and protocols you run. We will show your points and alarms in RCC, read-only, beside your cameras and doors.

Send us your BMS detailsAll solutions